Series A or Bridge: How One Hardware Startup Chose Its Next Check

Archi4 min read

startupsfundinghardware

Contents
  1. The choice on the table
  2. What each option actually contains
  3. The priced Series A
  4. The bridge from insiders
  5. The factors that actually decided it
  6. What the founders did
  7. The practical checklist
  8. The part nobody puts in the deck

The choice on the table#

A startup with roughly 40 employees and a working hardware product gets two term sheets in the same week. One is a priced Series A led by a venture fund. The other is a bridge round from existing investors, structured as convertible notes. The founders have to pick one, and they have about ten days before the money runs low enough to spook suppliers.

This is a common fork for hardware companies. Software startups can stretch a runway with a small team and cheap infrastructure. A hardware company that needs to place a factory order cannot. Deposits, tooling, and component lead times all demand cash up front. The decision below is a composite built from how these situations typically play out. The numbers are illustrative, but the tradeoffs are real.

What each option actually contains#

The priced Series A#

The venture term sheet offers a pre-money valuation in the low tens of millions. It comes with a board seat for the lead investor, a liquidation preference, and a set of protective provisions. The money is larger, and it arrives as a single tranche after diligence and legal work, typically six to ten weeks from signing.

The catch is timing. Diligence on a hardware company takes longer than founders expect. Auditors want to see inventory records. The lead investor's technical partner wants to inspect the supply chain. Every week of delay is a week the factory deposit slips.

The bridge from insiders#

Existing investors offer a convertible note at a discount to the next priced round, with a valuation cap. The paperwork is short. The money can land in two to three weeks. No new board seat, no new protective provisions. The founders keep control, at least on paper.

The catch is the cap. If the company grows, the cap converts into a share of future equity that is expensive. Bridge rounds also send a signal to later investors, and that signal is not always neutral. Some Series B funds read a bridge as a sign the company could not clear a priced round.

The factors that actually decided it#

Three things broke the tie.

Factory lead time. The company's contract manufacturer required a deposit 14 weeks before the ship date. A six-week diligence window plus two weeks of legal work left no cushion. If the Series A slipped, the deposit slipped, and the ship date slipped with it. The bridge protected the ship date. The Series A protected the valuation.

The liquidation preference. A 1x non-participating preference is standard and mostly harmless. A 2x participating preference is a different animal, because it stacks ahead of common shares in a sale. The founders asked for the same terms the lead fund had offered another portfolio company, and got a 1x. This mattered less than the timing question but more than the founders expected when they ran the waterfall model.

The investor's own incentives. The bridge investors had already put money in. Their downside was capped by their existing position, and their upside depended on the next round being priced well. That alignment is not guaranteed. Some bridge investors push for terms that protect themselves at the expense of the next lead. The founders checked whether the note had a most-favored-nation clause, which would let them match better terms if another investor joined. It did not.

What the founders did#

They took the bridge. Then they did something that is less common than it should be: they wrote down a plan for the next priced round before signing the note. The plan set a target metric, a monthly recurring revenue figure for the hardware subscription tier, and a date by which they would either hit it or start a process to sell the company.

That plan is the part most primers skip. A bridge is a tool for buying time, and time is only useful if it is spent against a specific goal. Without one, the bridge becomes the first of several, and each one dilutes the founders a little more.

The practical checklist#

If you are facing the same fork, run through these questions before you sign anything. , How many weeks of cash do you have if the larger round slips by 50 percent? If the answer is fewer than eight, the bridge is probably the safer choice., What is the discount and the cap on the note? Model both scenarios. A 20 percent discount with no cap is very different from a 15 percent discount with a cap at your last valuation., Does the note have an MFN clause? If another investor offers better terms, can you match them?, What does the bridge signal to the next lead? Ask two or three investors who are not in the round. Their read is the one that matters., Is the board composition locked for the next round, or does the note convert into a seat?, What happens if you miss the target metric? Write down the fallback before you sign, not after.

The part nobody puts in the deck#

Hardware startups die on cash timing more often than on bad products. The Series A versus bridge question is really a question about which risk you can afford to carry. A lower valuation is a paper loss. A missed factory deposit is a real one.

The founders in this example chose the smaller check and the tighter timeline. Whether it was the right call will not be clear for a year. What is clear is that they made the decision with a written plan and a date attached to it, which is more than most companies manage when the money is running out.

More articles